Hi,
Because of update of my project i wish to offer some parts for sale:
-----------------------------------------------------------------------------------------
6 pcs of SHF25 - Linear Rod Rail Shaft Support -
(http://lh6.googleusercontent.com/-qelRWSBfZk8/UQUVwseCUBI/AAAAAAAAL3Y/hV94PIZhASM/s720/DSC_6219.JPG)
new, never used - price: 25e without delivery
===================================================
3pcs of 5 to 10mm CNC Flexible motor shaft coupler (new)
(http://lh5.googleusercontent.com/-5hY561qeBmg/UQUVwltZ-8I/AAAAAAAAL3Q/PwTzLcqClas/s720/DSC_6220.JPG)
new, never used - price: 8e without delivery SOLD
===================================================
from that machine:
(http://s7.postimage.org/tlxc9qd57/IMG_1169_a.jpg)
for sale is:
4pcs of 5 to 6mm CNC Flexible motor shaft coupler (only one is new, the other 3 are still on machine)
(http://lh4.googleusercontent.com/-i0WUikVmsKs/UQUVwyz_YWI/AAAAAAAAL3U/JrUB3SlOW9Q/s720/DSC_6222.JPG)
new&used - price: 12e without delivery
3 x stepper , nema 17
~~~~~~~~~~~~~~~~
Type:Stepper Nema 17
Angle step:1.8°
Voltage: 3.4V
Rate current:1.7A
Phase resistance: 2 oM
Phase inductance: 3 mH
Holding torque: 4000 g.sm
Lead wires: 4
Rotor inertia: 54 g.cm2
Detent torque: 220 g.cm
Motor weight: 0.3 kg
Motor lenght: 40mm
Motor width: 42mm
used - price: 50e without delivery
CNC to PC breakboard - 5axis, limits, joystick control and more. Including CD with documents and LPT cable(mini USB not included)
(http://lh4.googleusercontent.com/-5Aki76cDR0w/UQUb8OIapKI/AAAAAAAAL34/6GL6JLdTcT4/s800/breakboard.jpg)
never used - price: 14e SOLD
Controller board:
(http://lh4.googleusercontent.com/-4mMDCD2qudw/UQUb8MtuzKI/AAAAAAAAL38/-Bhh-XJaV_Y/s720/controller-board.jpg)
(http://lh4.googleusercontent.com/-uJ5u4ZXPdzw/UQUb8D_i_5I/AAAAAAAAL4A/IYbMqcyIl9Q/s800/controller-board2.jpg)
My design, prepared to carry 3 x A4983 Stepper Motor Driver Carrier with Voltage Regulators Pololu(http://www.pololu.com/catalog/product/1202/resources) - MAX 2A per phase 1:1 to 1:128 step , adjusted via jumper configuration. Input STEP,DIR,ENABLE from break board.
!!! That 3 A4983 controllers from the picture are NOT included, only the board !!!
that is the second one and it never been used, but tested and work perfect - price: 22e without delivery
contact only on mail please: kovachev.svetoslav (at) gmail (*) com
Jeps ! Tavarat liikkuu Tältä Myyjältä-ostajalle perille asti :) 5mmX10mm couplingit saivat uuden omistajan ;) Pääsee asentaa moottoreita akseleihin kiinni :D