M:CNC stepperit

Matsushita 17PM-J142 - 42x42x40mm
- 6 wires
- 1.8°-step
- 24V
- 1.4A
- 2.3Ohm
- 250mNm - holding troque
- 3.1mH - inductance
- 44g*cm2 - rotor inertia
- 300g mass
- 8.3mNm torque




Määrä 2 kpl
Hinta:
- 10e / 1 kpl   + 5e posti (jos haluaa toimitus)
- 15e / 2kpl    + 8e posti  (jos haluaa toimitus)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Shinano stp 42 - 42*42*40mm
- 6 wires
- 1.8° - step
- 12-36V
- 1.2A
- 4.6Ohm
- 373mNm holding torque




Määrä 1 kpl
Hinta:
- 10e / 1 kpl   + 5e posti (jos haluaa toimitus)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Shinano stp 43 - 42*42*40mm
- 6 wires
- 1.8° - step
- 12-36V
- 1.2A - 1.4A
- 3.0Ohm
- 300mNm holding torque



Määrä 3 kpl
Hinta:
- 10e / 1 kpl   + 5e posti (jos haluaa toimitus)
- 25e / 3kpl    + 10e posti  (jos haluaa toimitus)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Epson prrinter
- 4 wire



Määrä 2 kpl
Hinta:
- 8e / 1 kpl   + 5e posti (jos haluaa toimitus)
- 10e / 2kpl    + 8e posti  (jos haluaa toimitus)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

TEAC / matsushita
- 6 wire



Määrä 1 kpl
Hinta:
- 8e / 1 kpl   + 5e posti (jos haluaa toimitus)




Kaikki moottorit yhdessä  : hinta 70e ( posti maksa sisään)

Minun suomalainen on huono. Jos halua kysyä on Suomeksi - email tai sms , muuten voi soitaa on Englantiksi


044 351 0 454 - kovachev.svetoslav *at* gmail *.* com



Katso koko ilmoitus

Hi,

Because of update of my project i wish to offer some parts for sale:
-----------------------------------------------------------------------------------------
6 pcs of SHF25 - Linear Rod Rail Shaft Support - 

new, never used - price: 25e without delivery
===================================================
3pcs of  5 to 10mm  CNC Flexible  motor shaft coupler (new)

new, never used - price: 8e without delivery SOLD
===================================================

from that machine:

for sale is:

4pcs of  5 to 6mm  CNC Flexible  motor shaft coupler (only one is new, the other 3 are still on machine)

new&used - price: 12e without delivery

3 x stepper , nema 17
~~~~~~~~~~~~~~~~
Type:Stepper Nema 17    
Angle step:1.8°    
Voltage: 3.4V    
Rate current:1.7A
Phase resistance: 2 oM     
Phase inductance: 3 mH    
Holding torque: 4000 g.sm    
Lead wires: 4    
Rotor inertia: 54 g.cm2    
Detent torque: 220 g.cm    
Motor weight: 0.3 kg
Motor lenght: 40mm
Motor width: 42mm

used - price: 50e without delivery


CNC to PC breakboard - 5axis, limits, joystick control and more. Including CD with documents and LPT cable(mini USB not included)

never used - price: 14e SOLD

Controller board:


My design, prepared to carry 3 x A4983 Stepper Motor Driver Carrier with Voltage Regulators Pololu(http://www.pololu.com/catalog/product/1202/resources) - MAX 2A per phase 1:1 to 1:128 step , adjusted via jumper configuration. Input STEP,DIR,ENABLE from break board.
!!! That 3 A4983 controllers from the picture are NOT included, only the board !!!
that is the second one and it never been used, but tested and work perfect - price: 22e without delivery


contact only on mail please: kovachev.svetoslav (at) gmail (*) com

Hi CNC gurus,
Hope i wont be killed if i write that topic in English(google translator will not help so much if i try to make it in Suomi).
I've made one small CNC-jursin , which was ok for few tests.. but it work far away from what i expect. Well do the job but i already plan proto 2: 

And here i come to the main question,and why i need help with some info - Where can i cut some parts with laser or water-jet machine?

Why i ask.. Well, the company where i work..have water-jet just my boss do not wish even to here to make something private because are few plates and i do not have company. And that was teh same answer what i get from most of the companies around - we do not cut wood or not work with private customers... huh..
Only one company made offer for.. 350e  ??? which is quite much i think.. but anyway, any idea where can i make my stuff in Rauma-Turku-Pori area...(or further with post delivery.. )

Thanks in advance